Interior Paints
Low-odour interior emulsions for walls and ceilings, with balanced opacity, finish quality, and cleanability for living and working spaces.
View categoryTrusted Across Nairobi
Quality paints for lasting impressions. From residential interiors to large-scale commercial projects, we supply and support dependable finishes.
Explore Categories
Choose a category to jump straight to matching products.
Low-odour interior emulsions for walls and ceilings, with balanced opacity, finish quality, and cleanability for living and working spaces.
View categoryWeather-resistant masonry coatings and heavier-build finishes that help handle UV, rain exposure, and minor surface irregularities outdoors.
View categoryHigher-performance finishing systems including gloss enamels and specialty coatings for tougher service conditions and longer finish retention.
View categorySurface-prep materials such as primers, thinners, and related support products that improve adhesion, application behavior, and finish durability.
View categoryProducts
Browse by category and open any product for full details.
Matt synthetic emulsion paint with excellent opacity, prepared for use on walls and ceilings.
Full DetailsOffers excellent durability and endurance for indoor and outdoor use, with a long-lasting finish.
Full DetailsLow molecular acrylic emulsion with high opacity, suitable for plastered walls and ceilings. Spreading rate: 12–16 m²/litre.
Full DetailsHigh superior, hard-wearing emulsion with an attractive washable sheen; suitable for interior home, office, and factory use.
Full DetailsEnamel finish designed for maximum durability, high gloss level, and excellent gloss retention.
Full DetailsPaint solvents used to reduce coating viscosity for better flow and leveling, and to clean brushes, rollers, spray lines, and other tools after application.
Full DetailsPreparatory base coats designed to improve adhesion on hard-to-paint substrates (including metal, plastic, masonry, and previously coated surfaces) before topcoats.
Full DetailsBonding systems used to join similar or dissimilar materials by wetting the substrate surface and developing cohesive strength to withstand service loads.
Full DetailsTwo-component epoxy coatings (resin + hardener) that cure into a hard film with strong resistance to abrasion, chemicals, and moisture for demanding surfaces.
Full DetailsSmooth matt base finish for interior walls and ceilings.
Covermatt is a matt synthetic emulsion prepared for interior walls and ceilings where good hiding and a uniform flat appearance are required.
As an interior base/finish emulsion, it is suited to projects that need consistent coverage and an even appearance across large wall areas.
Product Type
Interior Matt Emulsion
Spreading Rate
Typical 13-16 sq.m/litre
Key Features
Get a Quote
Same interior emulsion class for walls and ceilings, focused on clean coverage and everyday durability.
Also an interior emulsion, but with a washable silk sheen for rooms needing easier maintenance.
Durable wall coating for interior and exterior masonry applications.
Pollar Rock (Wallmaster) is positioned as a long-lasting wall coating with strong endurance for both indoor and outdoor wall surfaces.
It is typically used where higher surface toughness and weather tolerance are needed, especially on masonry substrates.
Product Type
Exterior/Interior Masonry Wall Coating
Spreading Rate
Typical 10-14 sq.m/litre (smooth surfaces)
Key Features
Get a Quote
Belongs to the exterior category as a weather-resistant masonry coating built for rain, UV, and outdoor exposure.
Interior emulsion for plastered walls and ceilings.
Plastic Emulsion is an acrylic-based emulsion paint designed for use on plastered walls and ceilings where clean finish and coverage are required.
Its low molecular acrylic binder helps film formation, while high opacity pigments improve hiding power across interior surfaces.
Product Type
Interior Acrylic Emulsion
Spreading Rate
12-16 sq.m/litre
Key Features
Get a Quote
Same interior paints category, offering a matt emulsion option for flatter, non-reflective wall finishes.
Same interior emulsion family, but tuned for a higher sheen and better washability.
Smooth, washable finish for interior walls.
Silk Vinyl is an interior emulsion designed for professional applications where a washable sheen finish is preferred over flat matt systems.
The coating is formulated for interior home, office, and factory spaces that need a cleaner surface appearance with improved wipeability and durability.
Product Type
Interior Vinyl Emulsion
Spreading Rate
Approx. 16-18 sq.m/litre
Key Features
Get a Quote
In the same interior category as a matt emulsion alternative where low-sheen appearance is preferred.
Also an interior wall and ceiling emulsion designed for solid hiding and general decorative work.
Exterior weather-resistant coating for masonry walls.
Weather Guard is an exterior coating formulated on acrylic copolymer emulsion technology for better performance in exposed outdoor conditions.
It is selected where UV, rain, and general weather resistance are required on exterior wall surfaces while maintaining appearance over time.
Product Type
Exterior Acrylic Copolymer Coating
Spreading Rate
Typical 12-15 sq.m/litre
Key Features
Get a Quote
Same exterior/textured grouping because it is built for durable masonry performance in exposed conditions.
High-gloss enamel finish for durable decorative protection.
Super gloss is an enamel finish designed to deliver a bright gloss appearance with strong gloss retention over the service life of the coating.
It is used where a durable decorative finish is needed on suitably prepared interior or exterior trim and metal/wood surfaces.
Product Type
Gloss Enamel Topcoat
Spreading Rate
Typical 9-11 sq.m/litre
Key Features
Get a Quote
Also in Gloss & Specialty as a high-performance protective coating used where chemical and abrasion resistance are critical.
Solvent reducers for application viscosity control and equipment cleaning.
Thinners are solvent blends used to adjust paint viscosity so coatings apply with better atomization, flow, and leveling for the selected method.
They are also used for cleaning application tools and equipment after solvent-based coating work.
Product Type
Coating Solvent / Reducer
Use Rate
Typical 5-15% by volume (system dependent)
Key Features
Get a Quote
Surface-preparation base coats for adhesion and topcoat performance.
Primers are preparatory coatings used before finish coats to improve adhesion, unify substrate absorbency, and support long-term coating durability.
They are critical on difficult or porous substrates where direct topcoating may lead to uneven finish or poor bonding.
Product Type
Adhesion-Promoting Base Coat
Spreading Rate
Typical 8-12 sq.m/litre
Key Features
Get a Quote
Construction and finishing bonding products for multiple substrates.
Adhesives are used to bond similar or dissimilar materials where mechanical fastening is impractical or supplementary bonding is required.
Performance depends on substrate preparation, adhesive chemistry, and application method (bead, trowel, or film).
Product Type
Construction / Finishing Adhesive
Application Rate
Typical 100-300 g/m² (or bead-rate equivalent)
Key Features
Get a Quote
High-performance two-component protective coating systems.
Epoxy paints are two-component systems (resin and hardener) that cure chemically into dense, hard films for demanding service environments.
They are commonly selected for floors and high-wear surfaces requiring enhanced chemical, abrasion, and moisture resistance.
Product Type
2K Epoxy Protective Coating
Spreading Rate
Typical 7-10 sq.m/litre per coat
Key Features
Get a Quote
Also in Gloss & Specialty as a durable decorative topcoat where high gloss and finish retention are required.
How It Works
We make the process straightforward, whether you're ordering 200 litres or choosing your first colour.
Tell us about your project. Our team recommends the right product, finish, and quantity.
Choose from 10 colours or bring a sample. We mix to your exact specification.
Fast delivery across Nairobi. Bulk orders dispatched to any location in Kenya.
Ongoing technical support — surface prep guides, application tips, and warranty coverage.
About Us
Full-spectrum paint company specializing in the supply and application of premium architectural paint.
Pollar Paints Company is a full-spectrum paint company focused on manufacturing and application of premium architectural paint products.
To provide an outstanding and memorable customer experience through unwavering commitment to high-quality products.
To improve product quality, reduce production time, increase efficiency, and minimize lead time by reducing wasted time.
Inquiries, quotes, and technical support.
Contact Person
Janet Kore
Director
Phone
Location
Nairobi
Welcome! Please fill in the details to get started.
Welcome back! Please sign in to continue
Security changes are simulated for demo flow.
Silver
$89.99/ month
Statements are generated after every paid paint order.